Vibratory Hammers SpecificationsAntaeus 400
Antaeus · Vibratory Hammers
Antaeus 400
Antaeus 400 vibratory pile driver and extractor, available through PACO with the shared C18 800 hp power unit. Contact PACO for beam and clamp configuration.
Units
Vibratory Hammer
Published manufacturer specifications. Confirm the actual unit, power pack and clamp configuration with PACO. Vibrating weight is not separately published; the calculator estimates it as 50% of hammer weight without clamps.
| Specification | US | Metric |
|---|---|---|
| Eccentric Moment | 13,000 in-lb | 150 kg-m |
| Drive Force (Published) | 350 US tons | 3,113 kN |
| Frequency | 0–1,650 VPM | 0–1,650 VPM |
| Maximum Line Pull | 250 US tons | 2,224 kN |
| Hammer Weight Without Clamps | 38,000 lb | 17,236 kg |
| Throat Width | 32 in | 812.8 mm |
| Length | 142 in | 3,606.8 mm |
| Height Without Clamp | 90 in | 2,286 mm |
C18 800 HP Power Unit
Shared PACO C18 power-unit configuration. Published power-unit specifications; confirm the actual supplied package with PACO. Power-unit weight is separate from hammer weight and is not included in the amplitude calculation.
| Specification | US | Metric |
|---|---|---|
| Engine Type | C18 — Tier 4 / Stage 5 | C18 — Tier 4 / Stage 5 |
| Power | 800 hp | 597 kW |
| Engine Speed | 1,800 RPM + UPDRIVE™ | 1,800 RPM + UPDRIVE™ |
| Drive Pressure | 4,500 psi | 310 bar |
| Drive Flow | 231 US gpm | 874 L/min |
| Clamp Pressure | 4,800 psi | 331 bar |
| Clamp Flow | 10 US gpm | 38 L/min |
| Weight (All Fluids) | 23,900 lb | 10,840 kg |
| Length | 185 in | 470 cm |
| Height | 95 in | 241 cm |
| Width | 81.5 in | 207 cm |
| Hydraulic Reservoir | 800 US gal | 3,028 L |
| Spare Hydraulic Reservoir | 55 US gal | 208 L |
| Fuel Capacity | 150 US gal | 567 L |