ICE 130 hydraulic vibratory driver/extractor with 13,200 in-lb eccentric moment and 415 US tons of published driving force. Confirm the available clamp, beam and power-unit configuration with PACO.

Vibratory Hammer

ICE current published US specifications; metric values are converted and rounded. Bare hammer, configured suspended load and power-unit weight are different measurements.

Specification	US	Metric
Eccentric Moment	13,200 in-lb	152.08 kg-m
Maximum Frequency	1,450 VPM	1,450 VPM
Driving Force	415 US tons	3,692 kN
Centrifugal Force	395 US tons	3,514.1 kN
Amplitude (Free, Without Clamp)	0.81 in	20.574 mm
Standard Line Pull	200 US tons	1,779.3 kN
Optional Line Pull	200 US tons	1,779.3 kN
Weight (No Clamp or Hoses)	44,030 lb	19,971.7 kg
Non-vibrating Weight	11,000 lb	4,989.5 kg
Height Without Clamp	114 in	2,895.6 mm
Length	164 in	4,165.6 mm
Width	61 in	1,549.4 mm
Hydraulic Hose Length	150 ft	45.72 m
Hydraulic Hose Weight	2,400 lb	1,088.6 kg
Height With Beam & Caisson Clamps	148 in	3,759.2 mm
Weight With Beam, Caisson Clamps & Half Hoses	55,295 lb	25,081.4 kg

Model 1200E Power Unit

ICE published US specifications; metric values are converted and rounded. Power-unit weight is not hammer weight.

Specification	US	Metric
Engine	Twin Caterpillar C15	Twin Caterpillar C15
Emissions Rating	EPA Flex	EPA Flex
Power	1,190 hp	887 kW
Operating Speed	1,875 rpm	1,875 rpm
Maximum Motors Pressure	5,500 psi	379.2 bar
Motors Flow (No Load)	265 gpm	1,003.1 L/min
Clamp Pressure	4,500 psi	310.3 bar
Clamp Flow	6 gpm	22.7 L/min
Weight (Full Fluid & Half Fuel)	32,500 lb	14,742 kg
Length	224 in	5,689.6 mm
Width	84 in	2,133.6 mm
Height	114 in	2,895.6 mm
Hydraulic Oil Capacity	550 US gal	2,082 L
Fuel Capacity	430 US gal	1,627.7 L

Manufacturer specifications checked September 21, 2026. View manufacturer reference ↗. Confirm the actual equipment configuration with PACO before renting or purchasing.