The SM-20 is a multipurpose hydraulic drilling rig. Its modular design is engineered for the execution of micropiles, tie-backs, anchors, jet-grouting, drains, water wells.
Operating Weight (approximate) | 46,297 lbs | 21,000 kg |
Max Torque | 15,887 ft-lbs | 2,154 daNm |
Clamp Range | 2.4 - 12.6 in | 60 - 320 mm |
PREMIUM GEL is a 200 mesh, 90 bbl yield sodium bentonite for freshwater drilling, slurry walls, and tunnel boring.
Soda Ash is used to raise the pH of make-up water for Polymer and Bentonite drilling fluids by precipitating out hardness in the mix water.
CZM LR50
The LR50 is part of CZM’s Long Reach series and is mounted on a Cat® 323 Next Gen. The long reach configuration makes it ideal to applications such as sound bearing walls, transmission lines and utilities, drilling on a steep slopes, and difficult to reach holes. Kelly bar options vary from interlocking to round friction and have a standard drilling depth of 40ft with a maximum 8ft diameter.
Max Torque | 52,900 ft. lbs |
Horse Power | 172 h.p. |
Weight (In Operation) | 74,900 lbs. |
Sodium Hydroxide is a granular pH regulator and is an essential component when using the SHORE PAC foundation drilling slurry.
Let us design a slurry system program for your wet shaft drilling utilizing CETCO’s SHORE PAC polymer slurry.
- 3 drilling speeds
- Replaceable piston stem bearing
- Built-in automatic oiler
- Available wet or dry
- Counter clockwise rotation
- Rubber handle grips
Weight | 61 lbs |
PSI | 90 psi |
Air Consumption | 110 - 120 cfm |
Features:
• Stop-rotation feature
• Built-in automatic oiler
• Latch type retainer
• Lightweight aluminum cast handle
Weight | 19 lbs |
PSI | 90 psi |
Air Consumption | 32 - 36 cfm |
• 4 drilling speeds
• Replaceable piston stem bearing
• Available in wet or dry models
• Counter clockwise rotation
• Rubber handle grips
Weight | 38 lbs |
PSI | 90 psi |
Air Consumption | 85 - 90 cfm |
• Driving or setting masonry anchors and drilling holes in concrete, bricks or rock
• Used for chipping, scarifying, scaling and cleaning welds
• Superior drilling rates
• Greater drilling capacity compared to plug hole drills
• Designed for production drilling of small holes
Weight | 15 lbs |
PSI | 90 |
Air Consumption | 32 cfm |
• Driving or setting masonry anchors and drilling holes in concrete, bircks or rock
• As a hammer, used for chipping, scarifying, scaling and cleaning welds
• Superior drilling rates
• Greater drilling capacity compared to plug hole drills
• Designed for production drilling of small holes
Weight | 8 lbs | |
PSI | 90 psi | |
Air Consumption | 20 cfm |
Medium chips are a 3/8” granular fluid loss additive. They are a natural sodium bentonite screened to 3/8” in size.
Soilmec SM-14 is a multipurpose drilling rig. Its modular design is engineered for the execution of:
Micropiles, Tie-backs, Jet-grouting, Drain, Water wells.
Operating Weight (approximate) | 31,526 lbs | 14,300 kg |
Max Torque | 10,031 ft-lbs | 1,360 daNm |
Clamp Range | 2 - 16 in | 50 - 415 mm |
The ChemGrout model CG-542 is a skid mounted air powered grout plant.
Used for: rock bolts, rock anchors, cable grouting, cable stays, waterproofing, rock and soil nails.
• Right-hand rotation
• Lightweight, aluminum cast, D-style handle
• Inside trigger for better control and safety
• Deep case hardened alloy steel cylinder
Weight | 9 lbs |
PSI | 90 psi |
Air Consumption | 19 - 21 cfm |
Maximum Energy | 50,200 ft-lbs | 6,943 kg m |
Weight | 39,000 lbs | 17,690 kg |
Air Required | 1,746 cfm | 49 cu m/min |
