PREMIUM GEL is a 200 mesh, 90 bbl yield sodium bentonite for freshwater drilling, slurry walls, and tunnel boring.
Soda Ash is used to raise the pH of make-up water for Polymer and Bentonite drilling fluids by precipitating out hardness in the mix water.
- 3 drilling speeds
- Replaceable piston stem bearing
- Built-in automatic oiler
- Available wet or dry
- Counter clockwise rotation
- Rubber handle grips
Weight | 61 lbs |
PSI | 90 psi |
Air Consumption | 110 - 120 cfm |
The SM-20 is a multipurpose hydraulic drilling rig. Its modular design is engineered for the execution of micropiles, tie-backs, anchors, jet-grouting, drains, water wells.
Operating Weight (approximate) | 46,297 lbs | 21,000 kg |
Max Torque | 15,887 ft-lbs | 2,154 daNm |
Clamp Range | 2.4 - 12.6 in | 60 - 320 mm |
Sodium Hydroxide is a granular pH regulator and is an essential component when using the SHORE PAC foundation drilling slurry.
• Right-hand rotation
• Lightweight, aluminum cast, D-style handle
• Inside trigger for better control and safety
• Deep case hardened alloy steel cylinder
Weight | 9 lbs |
PSI | 90 psi |
Air Consumption | 19 - 21 cfm |
Let us design a slurry system program for your wet shaft drilling utilizing CETCO’s SHORE PAC polymer slurry.
Soilmec SM-14 is a multipurpose drilling rig. Its modular design is engineered for the execution of:
Micropiles, Tie-backs, Jet-grouting, Drain, Water wells.
Operating Weight (approximate) | 31,526 lbs | 14,300 kg |
Max Torque | 10,031 ft-lbs | 1,360 daNm |
Clamp Range | 2 - 16 in | 50 - 415 mm |
Features:
• Stop-rotation feature
• Built-in automatic oiler
• Latch type retainer
• Lightweight aluminum cast handle
Weight | 19 lbs |
PSI | 90 psi |
Air Consumption | 32 - 36 cfm |
• 4 drilling speeds
• Replaceable piston stem bearing
• Available in wet or dry models
• Counter clockwise rotation
• Rubber handle grips
Weight | 38 lbs |
PSI | 90 psi |
Air Consumption | 85 - 90 cfm |
• Driving or setting masonry anchors and drilling holes in concrete, bricks or rock
• Used for chipping, scarifying, scaling and cleaning welds
• Superior drilling rates
• Greater drilling capacity compared to plug hole drills
• Designed for production drilling of small holes
Weight | 15 lbs |
PSI | 90 |
Air Consumption | 32 cfm |
• Driving or setting masonry anchors and drilling holes in concrete, bircks or rock
• As a hammer, used for chipping, scarifying, scaling and cleaning welds
• Superior drilling rates
• Greater drilling capacity compared to plug hole drills
• Designed for production drilling of small holes
Weight | 8 lbs | |
PSI | 90 psi | |
Air Consumption | 20 cfm |
Medium chips are a 3/8” granular fluid loss additive. They are a natural sodium bentonite screened to 3/8” in size.
SM-4 is a new drilling machine featuring a separate power pack and the same movements of its larger sister, the SM-5.
It has two different engine sizes available: 115 kW and 110 kW respectively (diesel and electrical).
Operating Weight (approximate) | 8,158 lbs | 3,700 kg |
Max Torque | 24,708 ft-lbs | 3,350 daNm |
Clamp Range | 2 - 13 in | 50 - 320 mm |
CETCO Crumbles is an 8-20 mesh coarse granular bentonite fluid loss additive composed of polymer-free, dried bentonite.
INSTA-CLEAR DRY is designed to lower pH, break emulsions, and remove high levels of suspended solids. It is very effective in flocculating a shaft prior to sand content checks if needed.
SLURRY BUSTER DRY is an industrial grade oxidizing agent used to breakdown SHORE PAC polymer slurry. Composed of 65% active ingredients, SLURRY BUSTER DRY will not freeze.
The TD25+ is a low overhead, Takeuchi mini excavator mounted mini piling rig capable of drilling 35” diameter piles to depths of 42ft.
Torque | 18,439 ft lbs | |
Base Carrier | Takeuchi TB260/Excavator | |
Max Drill Depth | 59 ft | |