Maximum Unloading Working Pressure | 145 psi | 10 bar |
Actual Free Air Delivery | 1127 cfm | 532 l/s 32 m3/min |
Horsepower | 426 bhp | 318 kW |
Utilizing 4 pole, 1800 rpm motors and 6 pole, 1200 rpm motors the GSZ Series offers longer wear life on parts due to the slower impeller tip speed.
The CX range of piling hammers is designed for driving a wide variety of bearing and sheet piles.
Energy Range | 60,000 ft-lbs | 81 kNm |
Hammer Weight | 22,700 lbs | 10,297 kgm |
Blow Rate | 40 bpm | 40 bpm |
The CG range of piling hammers is designed for driving a variety of bearing piles including steel tube,combi piles, ‘H’ sections and reinforced / pre stressed concrete piles.
Energy Range | 220,440 ft-lbs | 299 kNm |
Hammer Weight | 57,530 lbs | 26,095 kgm |
Blow Rate | 29 bpm | 29 bpm |
Highest driving force (415 tons, 3,700 kN) of any single ICE Vibrator.
Eccentric Moment | 12,500 in-lbs | 142 kgm |
Dynamic Force | 415 tons | 3,700 kN |
Suspended Weight | 32,500 lbs | 14,740 kg |
Minimum Energy | 241,470 ft-lbs | 327 kNm |
Maximum Energy | 394,250 ft-lbs | 535 kNm |
Weight | 74,516 lbs | 33,800 kg |
The ICE 14-23 has a patented design that combines high frequency with a lower suspended weight for maximum driving force.
Eccentric Moment | 1,400 in-lbs | 16 kgm |
Driving Force | 74 tons | 660 kN |
Suspended Weight | 5,280 lbs | 2,395 kg |
Tsurumi's LH Series handles medium to high flows at higher heads, yet its top discharge flow-through design welcomes low water level operation for extended periods.
Maximum Unloading Working Pressure | 100 psi | 9 bar |
Actual Free Air Delivery | 1,800 cfm | 850 l/s 51 m3/min |
Horsepower | 475 bhp | 354 kW |
Maximum Unloading Working Pressure | 125 psi | 9 bar |
Actual Free Air Delivery | 825 cfm | 389 l/s 23 m3/min |
Horsepower | 275 bhp | 205 kW |
Maximum Unloading Working Pressure | 150 psi | 10 bar |
Actual Free Air Delivery | 1,600 cfm | 755 l/s 45 m3/min |
Horsepower | 540 bhp | 403 kW |
The heavy duty “U” Series are designed for:
- Correcting errors in concrete levels
- Reducing the levels of concrete floors or pavements
- Remove laitance
Working Width | 15-3/4" | 400 mm |
Air Pressure | 90 psi | 80 lb/in2 |
Air Consumption | 210 cfm | 5.9 m3/m |
Maximum Unloading Working Pressure | 150 psi | 10 bar |
Actual Free Air Delivery | 900 cfm | 425 l/s 26 m3/min |
Horsepower | 275 bhp | 205 kW |
Key Features:
- 4-bolt desing for longer life of handle
- Quick change retainer
- Hose swivel so hose tracks operator movement
PSI | 90 |
CFM | 34 - 36 |
Stroke | 4" |
Weight | 20 lbs |
Chuck Size | .680 Round |
The BS-2151(P), a robust, large capacity pump, is
ready for demanding duties in the most diverse
environments.
Series | K4U | K4U | K5U | K5U |
Line Pull | 4,000 lbs | 1,814 kg | 5,000 lbs | 2,268 kg |
Weight w/o Wire Rope | 850 lbs | 386 kg | 890 lbs | 404 kg |
PSI (Bar) | 90 | 6.2 bar | 90 | 6.2 bar |
CFM | 350 | 594 m3/h | 350 | 594 m3/h |
- New Automatic Ball Valve
- Drop forged steel handle
- Built-in automatic oiler
- Replaceable chuck bushing
- Rubber handle grip
- Latch type retainer
PSI | 90 psi |
CFM | 60 - 65 cfm |
Chuck Size | 1-1/4" AND 1-1/8" |
All BAUER-Pileco helmets are made from quality cast carbon steel. The cushion receptacles and pile insert
receptacles are machined flat for maximum energy transfer.
The U-Lead guiding is machined to warrant the required guiding tolerance.
max. sq. pile size | cushion | U-lead size | weight lbs. | |
|---|---|---|---|---|
500024-A | 24” | Ø 23” | 32.5” x 8” | 5,620 |
• New! Patented Automatic Ball Valve
• Built-in automatic oiler
• Drop forged, steel, T-style handle
• Replaceable chuck bushing
• Latch type retainer
• Deep, case hardened forged alloy steel cylinder
• Rubber handle grips
• Teflon faced throttle valve
PSI | 90 psi |
CFM | 34 - 38 cfm |
Weight | 37 lbs |
Maximum Unloading Working Pressure | 165 psi | 11 bar |
Actual Free Air Delivery | 375 cfm | 177 l/s 11 m3/min |
Horsepower | 130 bhp | 97 kW |