Utilizing 4 pole, 1800 rpm motors and 6 pole, 1200 rpm motors the GSZ Series offers longer wear life on parts due to the slower impeller tip speed.
Equipped with 10,000 pounds feet of torque, the TE1000 can efficiently install soil nails, tiebacks, micropiles and hollow bars up to 103 millimeters in diameter.
Torque | 10,000 ft-lbs | 1,383 kgm |
Hole Size | 5" - 22" | 127 - 558 mm |
Minimun Excavator Size | 25 ton | 25 ton |
MQ Power WhisperWatt Super-Silent portable generators provide reliable power to meet the most demanding requirements.
MQ Power WhisperWatt Super-Silent portable generators provide reliable power to meet the most demanding requirements.
SM-4 is a new drilling machine featuring a separate power pack and the same movements of its larger sister, the SM-5.
It has two different engine sizes available: 115 kW and 110 kW respectively (diesel and electrical).
Operating Weight (approximate) | 8,158 lbs | 3,700 kg |
Max Torque | 24,708 ft-lbs | 3,350 daNm |
Clamp Range | 2 - 13 in | 50 - 320 mm |
The CX range of piling hammers is designed for driving a wide variety of bearing and sheet piles.
Energy Range | 35,000 ft-lbs | 47 kNm |
Hammer Weight | 15,330 lbs | 6,954 kgm |
Blow Rate | 50 bpm | 50 bpm |
Camelever Trash Material Handlers are a semi-automatic dumping cost-effective solution to the problem of removing trash from upper floors and hard to reach areas.
The SL range of piling hammers are designed for driving sheet piles and small bearing piles of concrete, steel or timber.
Energy Range | 22,127 ft-lbs | 30 kNm |
Hammer Weight | 13,118 lbs | 5,950 kgm |
Blow Rate | 84 bpm | 84 bpm |
- Multi-position throttle enables smooth start up in drilling.
- The well balanced design between the drill weight and performance allows efficient operation when using the rock drill on steep slopes or anchor jobs.
- The most critical components are made of forged steel and are rugged and durable.
- Anti-vibration handles are now available as TJ-15SV and TJ-20SV.
Weight | 30.8 lbs |
PSI | 90 psi |
Air Consumption | 56 cfm |
The CX range of piling hammers is designed for driving a wide variety of bearing and sheet piles.
Energy Range | 60,000 ft-lbs | 81 kNm |
Hammer Weight | 22,700 lbs | 10,297 kgm |
Blow Rate | 40 bpm | 40 bpm |
The CX range of piling hammers is designed for driving a wide variety of bearing and sheet piles.
Energy Range | 78,000 ft-lbs | 106 kNm |
Hammer Weight | 27,600 lbs | 12,519 kgm |
Blow Rate | 36 bpm | 36 bpm |
Tsurumi Agitator Pump KTD Series is a cast iron made, heavy-duty slurry pump employing the KTZ Series as the base.
KTZ pumps are designed to withstand the most demanding conditions, including those found in the highly abrasive waters of construction, aggregate, and mining dewatering.
• Driving or setting masonry anchors and drilling holes in concrete, bircks or rock
• As a hammer, used for chipping, scarifying, scaling and cleaning welds
• Superior drilling rates
• Greater drilling capacity compared to plug hole drills
• Designed for production drilling of small holes
Weight | 8 lbs | |
PSI | 90 psi | |
Air Consumption | 20 cfm |
Tsurumi's LH Series handles medium to high flows at higher heads, yet its top discharge flow-through design welcomes low water level operation for extended periods.
- Maximum power - slow, powerful blows efficiently and quickly compact all types of backfill, including clay and soils containing high percentages of finely crushed or powdered material
- Heat-treated cylinder and chrome plated piston - significantly extend tool life
- Adjustable packing-maintains a positive air seal
- Butt held with clamp screw - for quick, easy replacement
PSI | 90 |
CFM | 18 |
Weight | 30 lbs |
- Maximum power - slow, powerful blows efficiently and quickly compact all types of backfill, including clay and soils containing high percentages of finely crushed or powdered material
- Heat-treated cylinder and chrome plated piston - significantly extend tool life
- Adjustable packing-maintains a positive air seal
- Butt held with clamp screw - for quick, easy replacement
PSI | 90 |
CFM | 28 |
Weight | 42 lbs |
The new SM-5 by Puntel is a compact drill rig weighting 5.6 tons. It is available both with a combined kinematic mechanism.
Operating Weight (approximate) | 12,345 lbs | 5,600 kg |
Max Torque | 14,750 ft-lbs | 2,000 daNm |
Clamp Range | 1.9 - 8.6 in | 50 - 220 mm |
The SM-9 is a multipurpose drilling rig. Its modular design is engineered for the execution of: micropiles, tie-backs, jet-grouting, coring, drain, water wells.
Operating Weight (approximate) | 20,613 - 21,054 lbs | 9,350 - 9,550 kg |
Max Torque | 19,914 ft-lbs | 2,700 daNm |
Clamp Range | 2.4 - 12.6 in | 60 - 320 mm |
The SM-28 is a multipurpose rig that suits a wide range of civil engineering work requirements.
High standard components and advanced hydraulic circuit design have enabled increased rig performance, preserving its reliability, even under extreme conditions.
Operating Weight (approximate) | 72,752 - 83,776 lbs | 33,000 - 38,000 kg |
Max Torque | 24,339 ft-lbs | 3,300 daNm |
Clamp Range | 2.4 - 16.9 in | 60 - 430 mm |
Soilmec SM-14 is a multipurpose drilling rig. Its modular design is engineered for the execution of:
Micropiles, Tie-backs, Jet-grouting, Drain, Water wells.
Operating Weight (approximate) | 31,526 lbs | 14,300 kg |
Max Torque | 10,031 ft-lbs | 1,360 daNm |
Clamp Range | 2 - 16 in | 50 - 415 mm |