The CG range of piling hammers is designed for driving a variety of bearing piles including steel tube,combi piles, ‘H’ sections and reinforced / pre stressed concrete piles.
Energy Range | 132,240 ft-lbs | 179 kNm |
Hammer Weight | 42,100 lbs | 19,096 kgm |
Blow Rate | 34 bpm | 34 bpm |
Equipped with 10,000 pounds feet of torque, the TE1000 can efficiently install soil nails, tiebacks, micropiles and hollow bars up to 103 millimeters in diameter.
Torque | 10,000 ft-lbs | 1,383 kgm |
Hole Size | 5" - 22" | 127 - 558 mm |
Minimun Excavator Size | 25 ton | 25 ton |
Minimum Energy | 35,400 ft-lbs | 47.9 kNm |
Maximum Energy | 69,925 ft-lbs | 94.8 kNm |
Weight | 15,900 lbs | 7,210 kg |
The ChemGrout CG-600 colloidal series are heavy duty, high volume colloidal mixing grout plants.
Used for: Tunnels, mining, dam foundations, soil permeation, soil & rock grouting, microfine cements, and more...
Tsurumi Agitator Pump KTD Series is a cast iron made, heavy-duty slurry pump employing the KTZ Series as the base.
Eccentric Moment | 1,000 in-lbs | 113 nM | ||
Maximum Operating Frequency | 2,500 rpms | 2,500 rpms | ||
Amplitude | 5/8" | 16 mm | ||
Maximum Unloading Working Pressure | 125 psi | 9 bar |
Actual Free Air Delivery | 1600 cfm | 755 l/s 45 m3/min |
Horsepower | 440 bhp | 328 kW |
• Built in lubricator
• No side rod or springs to wear
• Composite valve eliminates rusting
• Power stroke piston
PSI | 90 psi |
CFM | 85 cfm |
Chuck Size | 1-1/4" AND 1-1/8" |
ICE 44B has the highest frequency and driving force in its class.
Eccentric Moment | 4,400 in-lbs | 51 kgm |
Driving Force | 207 tons | 1,844 kN |
Suspended Weight | 15,365 lbs | 6,970 kg |
- Single-stage centrifugal units driven by powerful vane motors
- Double seals protect bearings and motor from water and mud
- Integral oiler provides continuous lubrication
- Integral strainer, air inlet valve
- Bronze impeller
- Cast-iron housing
Net Weight | 33 lb | 15 kg |
Overall Height | 18 in | 445 mm |
Air Inlet Thread Size | 0.75 NPT-in | 19.05 mm |
- Single-stage centrifugal units driven by powerful vane motors
- Double seals protect bearings and motor from water and mud
- Integral oiler provides continuous lubrication
- Integral strainer, air inlet valve
- Bronze impeller
- Cast-iron housing
Net Weight | 57 lb | 26 kg |
Overall Height | 16 in | 406 mm |
Air Inlet Thread Size | 1 NPT-in | 25 mm |
Sand Sealant is a special blended dry powdered mineral and multi-seal. Multi-seal is a dry select blend of four types of materials: flake, granular, fine, and coarse fibers used for fluid loss control.
Maximum Unloading Working Pressure | 125 psi | 9 bar |
Actual Free Air Delivery | 750 cfm | 354 l/s 21 m3/min |
Horsepower | 173 bhp | 129 kW |
Maximum Energy | 15,000 ft-lbs | 2,074 kg m |
Weight | 9,700 lbs | 4,400 kg |
Air Required | 600 cfm | 17 cu m/min |
Bibo BS-2071 is especially suited to use where space
is limited; fit easily in a 8” pipe; ideal for fast
dewatering of manholes, casings, caissons, etc.
• Built in lubricator
• No side rods or springs to wear
• Composite valve eliminates valve rust
• Power-stroke piston
• Fronthead guides and supports spike
PSI | 90 psi |
CFM | 70 cfm |
Chuck Size | 1-1/4" AND 1-1/8" |
Pile Size / Opening | Cushion Size | Weight |
30" x 12.5" | Diameter 13" | 1,900 lbs |
38" x 14.5" | Diameter 17" | 3,280 lbs |
52" x 19" | Diameter 19" | 4,380 lbs |
With the Following Options:
- Only Single Stage Extension Hydraulic, Second Stage Pinned Every 12"
The ChemGrout CG-600/8CF colloidal grout plant is a compact, medium duty, colloidal grout plant.
Used for: Post tensioning, tunnels, shafts, mining, dam foundations, permeation grouting, soil & rock grouting, and more...
Pile Size/Opening | Cushion Size | Weight | |
Square 16" | Square 17" | 1,070 lbs |
The TC25+ is a low overhead, radio remote controlled, mini piling rig capable of drilling 39” diameter piles to depths of 59ft.
Specifications | ||
|---|---|---|
Torque | 25,814 ft lbs | |
Base Carrier | Techno Drill/Radio Remote | |
Max Drill Depth | 68.9 ft | |
