HPSI Vibratory Driver/Extractors are designed to be dependable and free of downtime.
Eccentric Moment | 650 in-lbs | 7 kgm |
Driving Force | 45 tons | 448 tonnes |
Suspended Weight | 3,150 lbs | 1,429 kg |
HPSI Vibratory Driver/Extractors are designed to be dependable and free of downtime.
Eccentric Moment | 1,300 in-lbs | 7 kgm |
Driving Force | 50 tons | 448 tonnes |
Suspended Weight | 7,050 lbs | 1,429 kg |
With a comprehensive range of pumps to suit any task, the Flygt 2600 series is the solution used to get the job done in mining, construction, industrial or municipal applications all over the world.
Sand Sealant is a special blended dry powdered mineral and multi-seal. Multi-seal is a dry select blend of four types of materials: flake, granular, fine, and coarse fibers used for fluid loss control.
PREMIUM GEL is a 200 mesh, 90 bbl yield sodium bentonite for freshwater drilling, slurry walls, and tunnel boring.
The Flygt 2600 series represents a major breakthrough in dewatering pump technology.
Radically engineered from the ground up, these robust pumps deliver unmatched wear resistance,consistent performance over time, and ease of service.
Features:
- Rigid steel design guarantees durability, reliability and safety
- Push button square drive release for quickly reversing the square drive for tightening or loosening
- Fine tooth ratchet prevents tool “lock-on”
- 360 degree swivel manifold with screw lock couplers
- Optional Allen key drives 1/2 - 2 1/4 inch, 14-85 mm
Soda Ash is used to raise the pH of make-up water for Polymer and Bentonite drilling fluids by precipitating out hardness in the mix water.
INSTA-CLEAR DRY is designed to lower pH, break emulsions, and remove high levels of suspended solids. It is very effective in flocculating a shaft prior to sand content checks if needed.
Sodium Hydroxide is a granular pH regulator and is an essential component when using the SHORE PAC foundation drilling slurry.
SLURRY BUSTER DRY is an industrial grade oxidizing agent used to breakdown SHORE PAC polymer slurry. Composed of 65% active ingredients, SLURRY BUSTER DRY will not freeze.
CZM LR50
The LR50 is part of CZM’s Long Reach series and is mounted on a Cat® 323 Next Gen. The long reach configuration makes it ideal to applications such as sound bearing walls, transmission lines and utilities, drilling on a steep slopes, and difficult to reach holes. Kelly bar options vary from interlocking to round friction and have a standard drilling depth of 40ft with a maximum 8ft diameter.
Max Torque | 52,900 ft. lbs |
Horse Power | 172 h.p. |
Weight (In Operation) | 74,900 lbs. |
Bibo BS-2140 is ideal for fast dewatering of
construction sites, tunnels, mines, quarries,
cofferdams, caissons, etc.
With a comprehensive range of pumps to suit any task, the Flygt 2600
series is the solution used to get the job done in mining, construction,
industrial or municipal applications all over the world.
All BAUER-Pileco helmets are made from quality cast carbon steel.
The cushion receptacles and pile insert receptacles are machined flat for maximum energy transfer.
The U-Lead guiding is machined to warrant the required guiding tolerance.
Camelever Trash Material Handlers are a semi-automatic dumping cost-effective solution to the problem of removing trash from upper floors and hard to reach areas.
Horizontal Position | Horizontal Position | Vertical Position | Vertical Position | |
Weight | 8 lbs | 3.63 kg | 8 lbs | 3.63 kg |
Chuck Size (std.) | 3/4" x 3-3/4" | 19.1 mm x 95.3 mm | 3/4" x 3-3/4" | 19.1 mm x 95.3 mm |
Operating Pressure | 80 psi | 5.5 bar | 80 psi | 5.5 bar |
Air Consumption (minimum) | 20 cfm | .56 m3/min | 20 cfm | .56 m3/min |
Soilmec SM-17 is a multipurpose drilling rig developed from the fusion of TREVI GROUP job-site experience and SOILMEC technological research.
Its modular design is engineered for the execution of: Micropiles, Tie-backs, Anchors, Jet Grouting and Mini-piles.
Operating Weight (approximate) | 37,478 - 39,600 lbs | 15,422 - 17,237 kg |
Max Torque | 18,048 ft-lbs | 2,447 daNm |
Clamp Range | 2 - 16 in | 60 - 415 mm |
Horizontal Position | Horizontal Position | Vertical Position | Vertical Position | |
Weight | 54 lbs | 24.5 kg | 54 lbs | 24.5 kg |
Chuck Size (std.) | 7/8" x 3-1/4" | 22.2 mm x 82.6 mm | 7/8" x 3-1/4" | 22.2 mm x 82.6 mm |
Operating Pressure | 90 psi | 6.2 bar | 90 psi | 6.2 bar |
Air Consumption (minimum) | 100 cfm | 2.8 m3/min | 100 cfm | 2.8 m3/min |
Horizontal Position | Horizontal Position | Vertical Position | Vertical Position | |
Weight | 54 lbs | 24.5 kg | 54 lbs | 24.5 kg |
Chuck Size (std.) | 7/8" x 3-1/4" | 22.2 mm x 82.6 mm | 7/8" x 3-1/4" | 22.2 mm x 82.6 mm |
Operating Pressure | 90 psi | 6.2 bar | 90 psi | 6.2 bar |
Air Consumption (minimum) | 100 cfm | 2.8 m3/min | 100 cfm | 2.8 m3/min |
Granular Viscous Soil Stabilizing Polymer/CalTrans approved along with many other state D.O.T.’s
The new SM-5 by Puntel is a compact drill rig weighting 5.6 tons. It is available both with a combined kinematic mechanism.
Operating Weight (approximate) | 12,345 lbs | 5,600 kg |
Max Torque | 14,750 ft-lbs | 2,000 daNm |
Clamp Range | 1.9 - 8.6 in | 50 - 220 mm |