The ChemGrout model CG502/030 is a skid mounted grout plant.
Used for: Voidfilling, waterproofing, spraying, post tensioning, machine base, and more...
• Built in lubricator
• No side rods or springs to wear
• Composite valve eliminates valve rust
• Power-stroke piston
• Fronthead guides and supports spike
PSI | 90 psi |
CFM | 70 cfm |
Chuck Size | 1-1/4" AND 1-1/8" |
The Flygt 2600 series represents a major breakthrough in dewatering pump technology.
Radically engineered from the ground up, these robust pumps deliver unmatched wear resistance,consistent performance over time, and ease of service.
Not every project needs a large pump, yet the application may call for a quality of pump a few grades higher than what's found in retail stores. In order to satisfy your customers, turn to Tsurumi's line of contractor ready utility pumps.
The ChemGrout model CG-QUATTRO is a wheel mounted, electric powered, continuous mixing grout machine
Used for: self leveling floor underlayments, plastering, stucco, EFIS, fireproofing, resurfacing deteriorated concrete, and more...
Tsurumi corrosion resistant pumps are available in 316 or 304 stainless steel (SFQ Series, SQ Series) as well as titanium (TM Series). Featuring semi-vortex, vortex, and semi-open impellers, our solidly engineered pumps can endure the corrosive forces of your toughest applications.
The ChemGrout CG-550 Geothermal series includes both skid and trailer mounted grout plants.
Used for: Geotechnical, Marine, and Utilities applications.
With a comprehensive range of pumps to suit any task, the Flygt 2600 series is the solution used to get the job done in mining, construction, industrial or municipal applications all over the world.
The ChemGrout CG-500 series are high volume production skid mounted grout plants.
Used for: Soil compaction, rock grouting, voidfilling, waterproofing, soil anchors, and more...
With a comprehensive range of pumps to suit any task, the Flygt 2600
series is the solution used to get the job done in mining, construction,
industrial or municipal applications all over the world.
With a comprehensive range of pumps to suit any task, the Flygt 2600 series is the solution used to get the job done in mining, construction,
industrial or municipal applications all over the world.
Striker | Weight |
17" x 4" | 200 lbs |
19" x 6" | 380 lbs |
23" x 10" | 950 lbs |
27" x 12" | 1,550 lbs |
37" x 12" | 3,080 lbs |
The ChemGrout model CG502 is a skid mounted grout plant.
Used for: Voidfilling, waterproofing, spraying, post tensioning,and more...
Tsurumi corrosion resistant pumps are available in 316 or 304 stainless steel (SFQ Series and SQ Series) as well as titanium (TM Series). Featuring semi-vortex, vortex, and semi-open impellers, our solidly engineered pumps can endure the corrosive forces of your toughest applications.
The ChemGrout CG-570 Thick Mix Series includes both skid and trailer mounted grout plants.
Used for: Anchoring rock bolts, repair mortar spraying, undersealing, slab raising, and more...
The ChemGrout High Pressure Pump series are skid mounted grout pumps.
Used for: Civil Engineering, Structural, Construction, Marine, Mining, Utilities, and Geotechnical applications.
The ChemGrout CG-500/031 High-Capacity Geothermal Series has been designed specifically for grouting geothermal loops.
Specifications | |||
|---|---|---|---|
Pump Size | 2" x 8" | 3" x 8" | 3.5" x 8" |
Maximum Output | 32 gpm (120 lpm) | ||
Maximum Pressure |
The ChemGrout CG-500HP series are skid mounted, high-pressure grout plants.
Used for: Civil Engineering, Structural, Construction, Marine and more.
The CX range of piling hammers is designed for driving a wide variety of bearing and sheet piles.
Energy Range | 35,000 ft-lbs | 47 kNm |
Hammer Weight | 15,330 lbs | 6,954 kgm |
Blow Rate | 50 bpm | 50 bpm |
Camelever Trash Material Handlers are a semi-automatic dumping cost-effective solution to the problem of removing trash from upper floors and hard to reach areas.
The CX range of piling hammers is designed for driving a wide variety of bearing and sheet piles.
Energy Range | 78,000 ft-lbs | 106 kNm |
Hammer Weight | 27,600 lbs | 12,519 kgm |
Blow Rate | 36 bpm | 36 bpm |
The CG range of piling hammers is designed for driving a variety of bearing piles including steel tube,combi piles, ‘H’ sections and reinforced / pre stressed concrete piles.
Energy Range | 176,320 ft-lbs | 239 kNm |
Hammer Weight | 47,170 lbs | 21,396 kgm |
Blow Rate | 31 bpm | 31 bpm |