Camelever Trash Material Handlers are a semi-automatic dumping cost-effective solution to the problem of removing trash from upper floors and hard to reach areas.
The SL range of piling hammers are designed for driving sheet piles and small bearing piles of concrete, steel or timber.
Energy Range | 22,127 ft-lbs | 30 kNm |
Hammer Weight | 13,118 lbs | 5,950 kgm |
Blow Rate | 84 bpm | 84 bpm |
The CX range of piling hammers is designed for driving a wide variety of bearing and sheet piles.
Energy Range | 60,000 ft-lbs | 81 kNm |
Hammer Weight | 22,700 lbs | 10,297 kgm |
Blow Rate | 40 bpm | 40 bpm |
The CX range of piling hammers is designed for driving a wide variety of bearing and sheet piles.
Energy Range | 78,000 ft-lbs | 106 kNm |
Hammer Weight | 27,600 lbs | 12,519 kgm |
Blow Rate | 36 bpm | 36 bpm |
The ChemGrout model CG540/2C4/A is a skid mounted, air powered grout machine.
Used for: waterproofing, spraying, post tensioning, machine base, self leveling floor underlayments, resurfacing deteriorated concrete, and more...
The ChemGrout model CG-542 is a skid mounted air powered grout plant.
Used for: rock bolts, rock anchors, cable grouting, cable stays, waterproofing, rock and soil nails.
Tsurumi Agitator Pump KTD Series is a cast iron made, heavy-duty slurry pump employing the KTZ Series as the base.
ChemGrout paddle mixers are equipped with a vertical shaft and feature specially designed blades and baffles.
The blades and baffles develop a high shear mixing action, insuring a rapid and thorough mix.
The ChemGrout CG-550 Thin Mix series includes both skid and trailer mounted grouting equipment.
Used for: Soil & rock, void filling, waterproofing, anchor, cable, rock bolts, encasements, and more...
KTZ pumps are designed to withstand the most demanding conditions, including those found in the highly abrasive waters of construction, aggregate, and mining dewatering.
The ChemGrout CG-600 colloidal series are heavy duty, high volume colloidal mixing grout plants.
Used for: Tunnels, mining, dam foundations, soil permeation, soil & rock grouting, microfine cements, and more...
Tsurumi's LH Series handles medium to high flows at higher heads, yet its top discharge flow-through design welcomes low water level operation for extended periods.
The CG range of piling hammers is designed for driving a variety of bearing piles including steel tube,combi piles, ‘H’ sections and reinforced / pre stressed concrete piles.
Energy Range | 132,240 ft-lbs | 179 kNm |
Hammer Weight | 42,100 lbs | 19,096 kgm |
Blow Rate | 34 bpm | 34 bpm |
The CG range of piling hammers is designed for driving a variety of bearing piles including steel tube,combi piles, ‘H’ sections and reinforced / pre stressed concrete piles.
Energy Range | 176,320 ft-lbs | 239 kNm |
Hammer Weight | 47,170 lbs | 21,396 kgm |
Blow Rate | 31 bpm | 31 bpm |
The ChemGrout CGC4 is a skid mounted, Size 4, Open-Throat Progressive Cavity Grout Pump.
Used for: Soil & rock, void filling, waterproofing, anchor, cable, rock bolts, encasements, marine/underwater, well casing, abandon shafts/holes, and more...
The CG range of piling hammers is designed for driving a variety of bearing piles including steel tube,combi piles, ‘H’ sections and reinforced / pre stressed concrete piles.
Energy Range | 220,440 ft-lbs | 299 kNm |
Hammer Weight | 57,530 lbs | 26,095 kgm |
Blow Rate | 29 bpm | 29 bpm |
The ChemGrout CG-450/2L4/EH is a custom designed, skid or wheel mounted, high shear injection system.
Designed for vacuum grouting of post tensioned cables ducts or small injection projects.
Used for: Heavy-duty frame and lifting lug stand up to the rugged conditions of post tension grouting.
The ChemGrout CG-C6 is a perfect solution when pumping viscous, abrasive or solid laden materials.
Used for: doil & rock, void filling, waterproofing, anchor, cable, rock bolts, encasements, marine/underwater, well casing, abandon shafts/holes, and more...
The new SM-5 by Puntel is a compact drill rig weighting 5.6 tons. It is available both with a combined kinematic mechanism.
Operating Weight (approximate) | 12,345 lbs | 5,600 kg |
Max Torque | 14,750 ft-lbs | 2,000 daNm |
Clamp Range | 1.9 - 8.6 in | 50 - 220 mm |
The SM-9 is a multipurpose drilling rig. Its modular design is engineered for the execution of: micropiles, tie-backs, jet-grouting, coring, drain, water wells.
Operating Weight (approximate) | 20,613 - 21,054 lbs | 9,350 - 9,550 kg |
Max Torque | 19,914 ft-lbs | 2,700 daNm |
Clamp Range | 2.4 - 12.6 in | 60 - 320 mm |
The SM-20 is a multipurpose hydraulic drilling rig. Its modular design is engineered for the execution of micropiles, tie-backs, anchors, jet-grouting, drains, water wells.
Operating Weight (approximate) | 46,297 lbs | 21,000 kg |
Max Torque | 15,887 ft-lbs | 2,154 daNm |
Clamp Range | 2.4 - 12.6 in | 60 - 320 mm |
Soilmec SM-17 is a multipurpose drilling rig developed from the fusion of TREVI GROUP job-site experience and SOILMEC technological research.
Its modular design is engineered for the execution of: Micropiles, Tie-backs, Anchors, Jet Grouting and Mini-piles.
Operating Weight (approximate) | 37,478 - 39,600 lbs | 15,422 - 17,237 kg |
Max Torque | 18,048 ft-lbs | 2,447 daNm |
Clamp Range | 2 - 16 in | 60 - 415 mm |