The PD-110 is ideally suited for:
- 2” to 3-1/2” pipe and tube
- Structural forms
- Pin piles
- Dock piles
- 4 x 4 wood
Air Consumption | 64 CFM @ 100 psi | 1.81 m3/min @ 6.9 Bar |
Weight | Approx 109.16 lbs | 49.5 kg |
500512-01 | 12" Square | 1,356 lbs |
500514-01 | 14" Square | 1,023 lbs |
500516-01 | 16" Square | 1,570 lbs |
500518-01 | 18" Square | 1,715 lbs |
500520 | 20" Square | 1,724 lbs |
- New! Patented Automatic Ball Valve
- Built-in automatic oiler
- Drop forged, steel, T-style handle
- Replaceable chuck bushing
PSI | 90 psi |
CFM | 47 cfm |
Weight | 37 lbs |
Length | Min. U-Lead | Weight | |
500513 | 30.5" | 26.5" x 8" | 870 lbs |
500513-2 | 38" | 32.5" x 8" | 2,600 lbs |
500513-4A | 43" / 39" | 32.5" x 8" | 2,600 lbs |
500513-5 | 51" | 42.5" x 8" | 3,550 lbs |
Medium chips are a 3/8” granular fluid loss additive. They are a natural sodium bentonite screened to 3/8” in size.
- Alloy steel forgings - provides excellent durability.
- Four-bolt backhead design - withstands rugged use.
- Integral oilers - provides continuous lubrication.
PSI | 90 psi |
CFM | 64 cfm |
Chuck Size | 1-1/4" AND 1-1/8" |
• Built in lubricator
• No side rods or springs to wear
• Composite valve eliminates valve rust
• Power-stroke piston
• Fronthead guides and supports spike
PSI | 90 psi |
CFM | 70 cfm |
Chuck Size | 1-1/4" AND 1-1/8" |
The ChemGrout model CG-DELTA MINI is a wheel mounted, electric powered, continuous mixing grout machine that is designed to provide a continuous mixing and pumping operation.
Used for: Self leveling floor underlayments, plastering, resurfacing deteriorated concrete, waterproofing, and more...
• Improved valve system and percussive mechanism, giving 20 percent more power
• Lubrication grooves on the piston to increase wear properties of the impact mechanism
• Lightweight yet rugged, designed for light-to-medium construction and plant maintenance work
• These tools are very popular for bridge deck jobs
• Four-bolt backhead design - withstands rugged use
PSI | 90 psi |
CFM | 57 cfm |
Chuck Size | 1" x 4 1/4" |
Maximum Energy | 15,000 ft-lbs | 2,074 kg m |
Weight | 9,700 lbs | 4,400 kg |
Air Required | 600 cfm | 17 cu m/min |
The CX range of piling hammers is designed for driving a wide variety of bearing and sheet piles.
Energy Range | 78,000 ft-lbs | 106 kNm |
Hammer Weight | 27,600 lbs | 12,519 kgm |
Blow Rate | 36 bpm | 36 bpm |
Maximum Energy | 386 ft-lbs | 53.36 kg m |
Weight | 786 lbs | 357 kg |
Air Required | 74 cfm | 2 cu m/min |
With a comprehensive range of pumps to suit any task, the Flygt 2600
series is the solution used to get the job done in mining, construction,
industrial or municipal applications all over the world.
- Removes rust and paint
- Removes cement from Steel
- Roughing cement
- Use in more compact areas where the T3 will not fit
Air Pressure | 90 psi | 90 lb/in2 |
Air Consumption | 15 cfm | .4 m3/min |
Weight | 4.8 lbs | 2 kg |
System Flow and Pressure | 40 GPM @ 3,000 PSI | 152 LPM @ 207 Bar |
Hole Size | 4.0" - 12.0" | 102 mm - 305 mm |
Minimum Excavator Size | 20 tons | 20 tons |
Equipped with 10,000 pounds feet of torque, the TE1000 can efficiently install soil nails, tiebacks, micropiles and hollow bars up to 103 millimeters in diameter.
Torque | 10,000 ft-lbs | 1,383 kgm |
Hole Size | 5" - 22" | 127 - 558 mm |
Minimun Excavator Size | 25 ton | 25 ton |
INSTA-CLEAR DRY is designed to lower pH, break emulsions, and remove high levels of suspended solids. It is very effective in flocculating a shaft prior to sand content checks if needed.
The PD-55 is ideally suited for:
- Driving t-posts
- Ground rod
- Tent stakes
- Grape stakes
- Delineator posts
- Form pins and fence posts up to 3 3/4”
Air Consumption | 42 CFM @ 90 psi | 1.19 m3/min @ 6.21 Bar |
Weight | Approx 54.6 lbs | 24.8 kg |
Maximum Energy | 24,375 ft-lbs | 3,370 kg m |
Weight | 16,250 lbs | 7,371 kg |
Air Required | 1,050 cfm | 30 cu m/min |
Maximum Energy | 8,750 ft-lbs | 1210 kg m |
Weight | 7,000 lbs | 3175 kg |
Air Required | 600 cfm | 17 cu m/min |
The ChemGrout CG-580/3.5X8 series is a high production volume, high pressure skid mounted grout plant.
Used for: Mining, tunnels, dams, soil compaction, rock grouting, water cut-off, and more...
- Heat treated alloy steel components
- Latch retainer
PSI | 90 psi |
CFM | 45 cfm |
Weight | 29 lbs |