The ChemGrout CG-400 Remediator is a skid mounted, gas/hydraulic, high pressure, environmental remediation injection system.
Uses: Geotechnical - environmental remediation, monitor wells, in situ injection, direct push injection.
The CX range of piling hammers is designed for driving a wide variety of bearing and sheet piles.
Energy Range | 78,000 ft-lbs | 106 kNm |
Hammer Weight | 27,600 lbs | 12,519 kgm |
Blow Rate | 36 bpm | 36 bpm |
• Right-hand rotation
• Lightweight, aluminum cast, D-style handle
• Inside trigger for better control and safety
• Deep case hardened alloy steel cylinder
Weight | 9 lbs |
PSI | 90 psi |
Air Consumption | 19 - 21 cfm |
Equipped with 10,000 pounds feet of torque, the TE1000 can efficiently install soil nails, tiebacks, micropiles and hollow bars up to 103 millimeters in diameter.
Torque | 10,000 ft-lbs | 1,383 kgm |
Hole Size | 5" - 22" | 127 - 558 mm |
Minimun Excavator Size | 25 ton | 25 ton |
The ChemGrout CG-570 Thick Mix Series includes both skid and trailer mounted grout plants.
Used for: Anchoring rock bolts, repair mortar spraying, undersealing, slab raising, and more...
The ChemGrout CG-580/J8 series are high production volume skid mounted grout plants.
Used for: soil compaction, rock grouting, voidfilling, waterproofing, soil anchors, well encasements, contact grouting, and more...
SM-4 is a new drilling machine featuring a separate power pack and the same movements of its larger sister, the SM-5.
It has two different engine sizes available: 115 kW and 110 kW respectively (diesel and electrical).
Operating Weight (approximate) | 8,158 lbs | 3,700 kg |
Max Torque | 24,708 ft-lbs | 3,350 daNm |
Clamp Range | 2 - 13 in | 50 - 320 mm |
INSTA-CLEAR DRY is designed to lower pH, break emulsions, and remove high levels of suspended solids. It is very effective in flocculating a shaft prior to sand content checks if needed.
CETCO Crumbles is an 8-20 mesh coarse granular bentonite fluid loss additive composed of polymer-free, dried bentonite.
Medium chips are a 3/8” granular fluid loss additive. They are a natural sodium bentonite screened to 3/8” in size.
The ChemGrout CG-600 colloidal series are heavy duty, high volume colloidal mixing grout plants.
Used for: Tunnels, mining, dam foundations, soil permeation, soil & rock grouting, microfine cements, and more...
The CG range of piling hammers is designed for driving a variety of bearing piles including steel tube,combi piles, ‘H’ sections and reinforced / pre stressed concrete piles.
Energy Range | 132,240 ft-lbs | 179 kNm |
Hammer Weight | 42,100 lbs | 19,096 kgm |
Blow Rate | 34 bpm | 34 bpm |
The CG range of piling hammers is designed for driving a variety of bearing piles including steel tube,combi piles, ‘H’ sections and reinforced / pre stressed concrete piles.
Energy Range | 220,440 ft-lbs | 299 kNm |
Hammer Weight | 57,530 lbs | 26,095 kgm |
Blow Rate | 29 bpm | 29 bpm |
The ChemGrout CG-550 Thin Mix series includes both skid and trailer mounted grouting equipment.
Used for: Soil & rock, void filling, waterproofing, anchor, cable, rock bolts, encasements, and more...
The CG range of piling hammers is designed for driving a variety of bearing piles including steel tube,combi piles, ‘H’ sections and reinforced / pre stressed concrete piles.
Energy Range | 176,320 ft-lbs | 239 kNm |
Hammer Weight | 47,170 lbs | 21,396 kgm |
Blow Rate | 31 bpm | 31 bpm |
• Driving or setting masonry anchors and drilling holes in concrete, bircks or rock
• As a hammer, used for chipping, scarifying, scaling and cleaning welds
• Superior drilling rates
• Greater drilling capacity compared to plug hole drills
• Designed for production drilling of small holes
Weight | 8 lbs | |
PSI | 90 psi | |
Air Consumption | 20 cfm |
Sodium Hydroxide is a granular pH regulator and is an essential component when using the SHORE PAC foundation drilling slurry.
- Maximum power - slow, powerful blows efficiently and quickly compact all types of backfill, including clay and soils containing high percentages of finely crushed or powdered material
- Heat-treated cylinder and chrome plated piston - significantly extend tool life
- Adjustable packing-maintains a positive air seal
- Butt held with clamp screw - for quick, easy replacement
PSI | 90 |
CFM | 18 |
Weight | 30 lbs |
SLURRY BUSTER DRY is an industrial grade oxidizing agent used to breakdown SHORE PAC polymer slurry. Composed of 65% active ingredients, SLURRY BUSTER DRY will not freeze.
- Maximum power - slow, powerful blows efficiently and quickly compact all types of backfill, including clay and soils containing high percentages of finely crushed or powdered material
- Heat-treated cylinder and chrome plated piston - significantly extend tool life
- Adjustable packing-maintains a positive air seal
- Butt held with clamp screw - for quick, easy replacement
PSI | 90 |
CFM | 28 |
Weight | 42 lbs |
Series | 35UWC441 | 35UWC441 |
Line Pull | 12,000 lbs | 5,445 kg |
Weight w/o Wire Rope | 2,125 lbs | 964 kg |
PSI (Bar) | 90 | 6.2 bar |
CFM | 600 | 1,019 m3/h |