The TD-610 is a very powerful and versatile mini piling rig. It is primarily designed for restricted access sites, but its mobility and high power mean that it can drill up to 600 mm diameter piles on open sites.
It is a rotary rig for use with augers, temporary casings and down the hole hammers.
Hole Size Range | 2'-6" - 3'-7" | 750 mm - 1,000 mm |
Torque | 7,375 ft-lbs | 10,000 Nm |
Rig Weight | 7,830 lbs | 3,550 kg |
Overview | ||
|---|---|---|
Height - Drilling (Mast Extended Including Winch Jib Arm) | 11'-6" | 3,500 mm |
Height - Drilling (Mast Closed Winch Jib Arm Removed) | 7'-3" | 2,200 mm |
Max Height When Tracking | 6'-3" | 1,905 mm |
Min Width | 2'-6" | 750 mm |
Max Width | 3'-7" | 1,000 mm |
Length - Drilling | 9'-9" | 2,970 mm |
Recommended Drill Tube Length | Max or 5' | 2,000 mm |
Recommended Drill Tube Length (Mast Closed) | Or 3' | 1,000 mm |
Rotator JT 203 Two Speed | 0 - 100 rpm | 0 - 100 rpm |
Max Torque | 7,375 ft. lbs | 10,000 Nm |
Weight | 7,830 lbs | 3,220 kg |
Mast Length (Closed) | 7'-3" | 2,200 mm |
Mast Length (Extended) | 10'-6" | 3,200 mm |
Feed Stroke (Closed) | 4'-7" | 1,400 mm |
Feed Stroke (Extended) | 7'-10" | 2,400 mm |
Rotator JT 202 Two Speed | 0 - 130 rpm | 0 - 130 rpm |
Pull On Main Ram | 13,200 lbs | 6,000 kg |
Push Down | 13,200 lbs | 6,000 kg |
Mast Angle Front / Rear | +5˚ -90˚ | +5˚ -90˚ |
Track Width Adjustment | Hydraulic | Hydraulic |
Controls On Swinging Arm | Hydraulic | Hydraulic |
Stabilizers At Rear Of Rig Winch | 7,900 lbs | 3,600 kg |
Hole Size Range | 2'-6" - 3'-7" | 750 mm - 1,000 mm |
Torque | 7,375 ft-lbs | 10,000 Nm |
Rig Weight | 7,830 lbs | 3,550 kg |
