- Removes rust and paint
- Removes cement from Steel
- Roughing cement
- Use in more compact areas where the T3 will not fit
Air Pressure | 90 psi | 90 lb/in2 |
Air Consumption | 9 cfm | .25 m3/min |
Weight | 4.8 lbs | 2 kg |
The ChemGrout model CG-630 Colloidal Mixer is a skid mounted, colloidal grout unit.
This system is designed to provide a continuous mixing operation. Used for: post tensioning, tunnels, shafts and mining.
The ChemGrout High Pressure Pump series are skid mounted grout pumps.
Used for: Civil Engineering, Structural, Construction, Marine, Mining, Utilities, and Geotechnical applications.
Maximum Unloading Working Pressure | 150 psi | 10 bar |
Actual Free Air Delivery | 1,600 cfm | 755 l/s 45 m3/min |
Horsepower | 475 bhp | 354 kW |
- Single-stage centrifugal units driven by powerful vane motors
- Double seals protect bearings and motor from water and mud
- Integral oiler provides continuous lubrication
- Integral strainer, air inlet valve
- Bronze impeller
- Cast-iron housing
Net Weight | 33 lb | 15 kg |
Overall Height | 18 in | 445 mm |
Air Inlet Thread Size | 0.75 NPT-in | 19.05 mm |
• 4 drilling speeds
• Replaceable piston stem bearing
• Available in wet or dry models
• Counter clockwise rotation
• Rubber handle grips
Weight | 38 lbs |
PSI | 90 psi |
Air Consumption | 85 - 90 cfm |
Series | BU7A | BU7A | BU7APTAB | BU7APTAB |
Line Pull | 1,000 lbs | 454 kg | 1,000 lbs | 454 kg |
Weight w/o Wire Rope | 75 lbs | 34 kg | 108 lbs | 49 kg |
PSI (Bar) | 90 | 6.2 bar | 90 | 6.2 bar |
CFM | 75 | 127 m3/h | 75 | 127 m3/h |
Applications:
- Packing sand
- Packing plastic alumnae in fire walls
- Packing cast stone
PSI | 90 |
CFM | 2 |
Weight | 7 lbs |
The ChemGrout CG-550/030 Rugged High Pressure series includes both skid and trailer mounted grout plants.
Used for: Civil Engineering, Structural, Construction, Marine, and more.
The Multi Quip line of WhisperWatt Super-Silent portable generators are designed and built to withstand tough construction environments.
Maximum Unloading Working Pressure | 195 psi | 13 bar |
Actual Free Air Delivery | 885 cfm | 418 l/s 25 m3/min |
Horsepower | 300 bhp | 223 kW |
With the Following Options:
- Only Single Stage Extension Hydraulic, Second Stage Pinned Every 12"
Horizontal Position | Horizontal Position | Vertical Position | Vertical Position | |
Weight | 8 lbs | 3.63 kg | 8 lbs | 3.63 kg |
Chuck Size (std.) | 3/4" x 3-3/4" | 19.1 mm x 95.3 mm | 3/4" x 3-3/4" | 19.1 mm x 95.3 mm |
Operating Pressure | 80 psi | 5.5 bar | 80 psi | 5.5 bar |
Air Consumption (minimum) | 20 cfm | .56 m3/min | 20 cfm | .56 m3/min |
Maximum Energy | 4,150 ft-lbs | 574 kg m |
Weight | 5,000 lbs | 2,268 kg |
Air Required | 450 cfm | 13 cu m/min |
The CG range of piling hammers is designed for driving a variety of bearing piles including steel tube,combi piles, ‘H’ sections and reinforced / pre stressed concrete piles.
Energy Range | 132,240 ft-lbs | 179 kNm |
Hammer Weight | 42,100 lbs | 19,096 kgm |
Blow Rate | 34 bpm | 34 bpm |
The ChemGrout CGC4 is a skid mounted, Size 4, Open-Throat Progressive Cavity Grout Pump.
Used for: Soil & rock, void filling, waterproofing, anchor, cable, rock bolts, encasements, marine/underwater, well casing, abandon shafts/holes, and more...
Maximum Unloading Working Pressure | 123 psi | 8 bar |
Actual Free Air Delivery | 392 cfm | 185 l/s 11 m3/min |
Horsepower | 111 bhp | 83 kW |
The CX range of piling hammers is designed for driving a wide variety of bearing and sheet piles.
Energy Range | 35,000 ft-lbs | 47 kNm |
Hammer Weight | 15,330 lbs | 6,954 kgm |
Blow Rate | 50 bpm | 50 bpm |
INSTA-CLEAR DRY is designed to lower pH, break emulsions, and remove high levels of suspended solids. It is very effective in flocculating a shaft prior to sand content checks if needed.
500512-01 | 12" Square | 1,356 lbs |
500514-01 | 14" Square | 1,023 lbs |
500516-01 | 16" Square | 1,570 lbs |
500518-01 | 18" Square | 1,715 lbs |
500520 | 20" Square | 1,724 lbs |