CG-630 Collodial Mixer

The ChemGrout model CG-630 Colloidal Mixer is a skid mounted, colloidal grout unit.

This system is designed to provide a continuous mixing operation.  Used for: post tensioning, tunnels, shafts and mining.

APT 137 Rock Drill
Weight38 lbs17 kg
Air Consumption90 cfm42 l/s
Blows per minute23002300
ICE-130 Vibratory Hammer

Highest driving force (415 tons, 3,700 kN) of any single ICE Vibrator.

Eccentric Moment

13,000 in-lbs

150 kgm

Dynamic Force

415 tons

3,700 kN

Suspended Weight

32,500 lbs

14,740 kg

D100-13 Diesel Hammer

Minimum Energy

157,685 ft-lbs

213.8 kNm

Maximum Energy

246,390 ft-lbs

334.1 kNm

Weight

48,800 lbs

22,135 kg

APT 131 Baclfill Tamper

Features:

  • Built-in large automatic oiler
  • Flapper valve design allows dirt to pass without stopping the tool
  • Internally reinforced 5-3/4" malleable iron butt (standard)
  • Pole (half-moon), and 3" diameter butts available

PSI

90

CFM

38-42

Weight

37 lbs

D-1300PHCA

Maximum Unloading Working Pressure

150 psi

10 bar

Actual Free Air Delivery

1,300 cfm

613 l/s 37 m3/min

Horsepower

475 bhp

354 kW

KRS Series Pumps

The cast iron construction of our KRS series extends pump life by preventing premature wear and failure from the abrasive materials found in mining, aggregate, and construction applications.

CG-620 Collodial Mixer

Skid mounted.  Applications: post tensioning, tunnels, shafts and mining.

TX1BLTCS Needle Scaler

Operating Air Pressure

90 psi

6.3 bar

Blows Per Minute

4,600 BPM

4,600 BPM

Avg. Air Consumption

12 CFM

12 CFM

Tool Weight

5 lbs

2.27 kg

E-Z Drill 210B-2 SRA

Horizontal Position

Horizontal Position

Vertical Position

Vertical Position

Weight

54 lbs

24.5 kg

54 lbs

24.5 kg

Chuck Size (std.)

7/8" x 3-1/4"

22.2 mm x 82.6 mm

7/8" x 3-1/4"

22.2 mm x 82.6 mm

Operating Pressure

90 psi

6.2 bar

90 psi

6.2 bar

Air Consumption (minimum)

200 cfm

5.6 m3/min

200 cfm

5.6 m3/min

Tsurumi LH Series

Tsurumi's LH Series handles medium to high flows at higher heads, yet its top discharge flow-through design welcomes low water level operation for extended periods. 

CG-620 Collodial Mixer

The ChemGrout CG-620 Collodial Mixer is a skid mounted system.

Used for: post tensioning, tunnels, shafts and mining.

APT 137 Rock Drill

• 4 drilling speeds
• Replaceable piston stem bearing
• Available in wet or dry models
• Counter clockwise rotation
• Rubber handle grips

Weight

38 lbs

PSI

90 psi

Air Consumption

85 - 90 cfm

Pages